Description

Description

Three point hitch 2" heavy duty receiver and bucket receiver combo!

Category# 1

Made in the USA by Rguile Industrial

Quick hitch compatible!

Material:

3" flat bar 3/8" thick.

2-1/2" X 2-1/2" Square tubing 3/16" thick

5/16" welded on grab hook

Color: Green

Comes with everything you need to mount:

2) 7/8 inch lower pins

1) 3/4 inch top pins

3) 7/16 lynch pins

Shipping Weight: 35 pounds

1 year warranty ! Like all Rguile.com USA made buckets hooks or attachments have been for years.

*1 business day until shipped after payment. Will be shipped UPS

Might ship sooner based on demand.

*Can be used on any tractor with Cat1 three point hitch.

*Which means 7/8 lower pins and 3/4 pin on top.

*Message me if you need help.

*John Deere, Kubota, New Holland Mahindra, Kioti etc.

Dimensions:

Height: 18-1/16"

Width: 24-3/4"

Depth: 4-1/2"

Top pin to lower pin center: 15-3/8"

Out side pin to pin tip: 32"

* This attachment will allow you attach a trailer hitch to your three point hitch. Along with a place to use a chain with the 3/8 grab hook.

Double hooks / 2" receiver with lower 1/2 shackle! "NEW ITEM" Ask for other colors!

* Great for John Deere because it fits hole pattern on factory buckets. (9-7/8" on center holes), and any other tractor if you drill holes. Message me for any info. Has 2 extra holes drilled in center (Recommend).

Handmade by Rguile.com Industrial in the USA

Tractor, Skidsteer, Bolt On Bucket Hook / Shackle

* 2) 5/16" Chain Grab Hooks

* 1/2" Shackle included

* Comes with all Grade 8 hardware (4) 1/2 x 2 bolts (4) lock nuts (8) washers

* Made with 3/8" inch x 3" inch Flat bar mild steel.

* Dimensions 11-1/8 inch by 3 inch front and back plates.

* 9-7/8" on center hole spacing on 9/16" drilled/ tapered holes (for 1/16" of play for both holes with 1/2" inch bolts).

* 4000 pound capacity ( do not exceed bucket equipment capacity)

Shipping Weight: 15 pounds

This Grab hook was designed to be easily bolted onto the bucket of your tractor. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8" steel backing plate along with the front 3/8" hook plate to sandwich your bucket steel. This will create a 3/4" thick by 11-1/8" long to distribute strength. The hook base is double welded to last. Might have to enlarge holes on your bucket to 1/2" diameter.

* 1 year Warranty!

Disclaimer: We are not responsible for any personal or property damage or injury. We are also not responsible for monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous, use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety.