Description

Double hooks with lower 1/2 shackle! "NEW ITEM"

*Comes with bolts and washers and lock nuts (Grade#8) !

Orange Kubota or any other tractor!

Handmade by Rguile.com Industrial in the USA

Tractor, Skidsteer, Bolt On Bucket Hook / Shackle

(1) Hook/ shackle with backplate Tractor / Skidsteer/ Loader bucket hook.

This Grab hook was designed to be easily bolted onto the bucket of your tractor. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8" steel backing plate along with the front 3/8" hook plate to sandwich your bucket steel. This will create a 3/4" thick by 11-1/8" long to distribute strength. The hook base is double welded to last. Might have to enlarge holes on your bucket to 1/2" diameter.

* 5/16" Chain Grab Hook

* Made with 3/8 inch x 3 inch Flat bar mild steel.

* Dimensions 11-1/8 inch by 3 inch front and back plates.

* 9-7/8" on center hole spacing on 9/16" drilled/ tapered holes.

* 4000 pound capacity ( do not exceed bucket equipment capacity)

* Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers

Shipping Weight: 11 pounds

* 1 year Warranty!

Disclaimer: We are not responsible for any personal or property damage or injury. We are also not responsible for monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous, use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety.