Description

Tractor, Skidsteer, Bolt On Bucket Hook / Shackle

* Great for John Deere, Kubota, Kioti, Mahindra, and ANY TRACTOR with a Bucket

Handmade by Rguile.com Industrial in the USA

Tractor / Skidsteer/ Loader bucket hook.

This Grab hook was designed to be easily bolted onto the bucket of your tractor. Ideally it should be centered inside your bucket to balance the weight. It comes with a 3/8" steel backing plate along with the front 3/8" hook plate to sandwich your bucket steel. This will create a 3/4" thick by 5-3/4" long to distribute strength. You will need a 1/2 inch drill bit in order to drill (2) holes for the 1/2" Grade 8 bolts and hardware (included). The hook base is double welded to last.

* 5/16" Chain Grab Hook

* Made with 3/8 x 2 Flat bar mild steel.

* Mig Welded for Strength

* Dimensions 5-3/4" by 2" front and back plates.

* 4-3/16" on center hole spacing on 9/16" drilled/ tapered holes.

* 4000 pound capacity ( do not exceed bucket equipment capacity)

* Comes with all Grade 8 hardware (2) 1/2 x 2 bolts (2) lock nuts (4) washers

* 1 year Warranty!

Disclaimer: We are not responsible for any personal or property damage or injury. We are also not responsible for monetary losses due to the use of this equipment. You assume all liability for the operation and installation of this attachment. Tractor/ Skidsteer loader work is dangerous, use at your own rick. Follow your equipment manufacturer specs and all literature and safety guidelines. At no point should you exceed the capacity of your tractor/ skid steer bucket loader. Please work safety.